Products Gallery

Split Repair Sleeves for oil, water, gas, steam and chemical high or low pressure pipelines and high or low temperature pipelines

A come-along power puller) is a hand operated winch with a ratchet used to pull objects

Compass or Divider can be used for inscribing circles or arcs. As dividers, they can also be used as tools to measure distances

STEEL STRIP TENSILE STRENGTH: 580-700N/mm2, ELONGATION: 3-4% WIDTH:3/4’’THICS :0.5MM EACH COIL 9KGS+/-1 AND 3COIL INTO ONE PACKAGE ( ONE PACKAGE IS 27KGS), HESSAN CLOTH PACKING

Flange two hole pins are used to make sure that any two flange holes are perfectly aligned to horizontal

Files of various shapes are used to remove burrs from cut edges of pipes and fittings. Can be also used to remove rust form small places

The Oil States Leak Repair Clamp (LRC) clamp and crack-type pipeline leaks

ELECTRIC CUTTER - 230V 50HZ Cut Ø 16 mm - R=70 Kg/mm2 Voltage 110V-120V-230V Watt 1100

split repair sleeve makes this pipe fit product suitable for a pipeline carrying oil, gas or chemical fluids with high temperatures and with pressures up to 3700 psi

Hammer Wrench has thick heavy end which can be hammered to provide extra force to loosen bolts if they are stuck

The pneumatic stopper type H is suitable to plug temporarily circular section pipes like oil and gas lines at relatively high pressures. For the H2S GAS

316L stainless steel strip 0.381 x 150mm & 316L stainless steel strip 0.508 x 150mm & 316L stainless steel strip size: 0.051 x 300mm with MTC 3.1 Patch for pipeline leaks.

Oxyacetylene Cutting Kit is used to cut large size pipes, elbows and steel plates using oxyacetylene flame

Packing strip machine high quality

Pipe bender is used to bend pipe at required degrees without causing dents in wall or undue deformation

Pipe clamps are used to hold pipes tightly for various purposes like cutting, threading or welding

Pipe cutter is used to cut pipe at required length with the help of shear force

Pipe stands are used to arrange pipes at required elevation during welding to each other or to fittings

Pipe threader is used to make threads at pipe fittings for threaded piping specification

Pipe vise is used to hold small size pipes tightly for various purposes like threading, cutting, welding etc.

Pipe wraps are used to make markings on pipes for cutting them to various shapes

Pipe Wrench is an adjustable wrench/spanner used for turning soft iron pipes and fittings with a rounded surface

LS01-03(1.5" 35MM) 35MM X 5MTR -(LC CAP - MBS 3000KG )CARGO LASHING RATCHET ASSEMBLY COLOR -YELLOW, END FITTING WITH J HOOK ON BOTH ENDS Standard: EN 12195-2 Material: Webbing 100% polyester

Protactor is used to measure or mark required angles during piping fabrication

Sledge Hammer is used to apply forces to wrenches or to align things

Spirit Level is used to ensure that piping is perfectly horizontal or vertical as required by piping layout

This tool is used to align flange bolt holes together as well as tighten the bolts

SPECIAL HOSE FOR AERATION OF BUIK POWDER InnerDiameter-71 mm / Flat Width - 113 mm DIN EN ISO 9237DIN53887 ne side Yellow Polyurethane Coated for Abrasion Resistance and to Support the Air permeability of the Uncoated Side (1 Roll – 100mtr) Made in Germany

Stainless Steel 316 Banding in Carton Box 5 kgs/roll 19mm x 0.6mm

Tirfor Winch are used to lift, pull and position loads over great distances depending on the wire rope length

Purge standard Inflatable Systems for welding Double Purge Bag Syslem Aquasol corporate

High strength, especially for chromated surfaces thread locker. Available in a 50ml or 250ml bottle

Fire Blankets 1m x 50m Heavy Duty Welding Drape on a Roll

Welding machine is used to weld two piping parts together using high ampere electric current and welding sticks.

Foam bigs

Pneumatic Pipe Cutting Machine is an orbital pipe cutter working on air pressure

Adjustable Wrench has adjusting wheel which changes distance between jaws so that different sizes of nuts can be removed.

C Clamp is used to hold and align different piping parts together for welding.

Center Punch is used to make markings along cutting line for welding purpose.

Chain block can lift weight 30 times of pulling force applied on lifting chain with help of internal gears

Chalk line is used to mark long straight lines on pipes or metal plates

Teel Test Plug Centre Locking Brass Wing for testing of drains and sewers in accordance with European Standards EN 1610: 1997

Test Plug accordance Standards EN 1610: 1997. Available in the size range 1.5 to 36" (38 to 900 mm). The Pipe stoppers® range of Aluminum Test Plugs are heavy duty and high temperature resistant

Pipe stoppers expandable aluminum Plugs Available in the size range 1.5 to 36" (38 to 900 mm). The Pipe stoppers® range of Aluminum Test Plugs are heavy duty and high temperature resistant

Blockade FC Phosphorus Tin Silicon Brazing Rods (20 Sticks per Tube) BKFC2500R1 Brand: Harris USA

Blank Inflatable Pipe Stoppers Maximum Inflation Pressure 2.5bar

Alfa Valvole A20R 800LB SCREWED BODY TYPE BALL VALVE ITALY

Inflatable pipe plugs reinforced with Aramid cord are noted for a wide application range. They can be used in different situations, where a pipe needs to be blocked or a bypass made

STEEL STRIP TENSILE STRENGTH: 580-700N/mm2, ELONGATION: 3-4% WIDTH:3/4’’THICS :0.5MM EACH COIL 9KGS+/-1 AND 3COIL INTO ONE PACKAGE ( ONE PACKAGE IS 27KGS), HESSAN CLOTH PACKING Stock

316 STAINLESS STEEL WING SEAL, 200 EA/BOX / Stainless steel wing seal Material: 316 stainless steel Size: 19mm x 0.8mm; Packing: 200 ea/box Stock

316 STAINLESS STEEL BUCKLE,100 EA/BOX / Material: 316 stainless steel; Size: 19mm x 1.5mm; Packing: 100 ea/box Stock

Material No MC1001 Banding tool Application: fit for 25mm wide banding Stock